The assembled payload bag was connected to a DJI Inspire 2—a popular consumer drone—using an S-carabiner clip attached to a Skyzimir Stork 2 drop mechanism. The Stork 2 features a set of stainless steel bars that interlock when the Inspire 2 landing gear is in the down position. The drop mechanism on the drone allows the release of the payload when the pilot uses a manual switch on his controller to raise the landing gear. For each drop, the bag with a tether was left at the drop site.
160 Newtown Road, Suite 302 | Virginia Beach, VA 23462 | 877-601-1860 | droneup.com
Powered by FlippingBook